Emission Factor Library: sources, governance and updates

Modified on Tue, 17 Nov at 1:10 PM

Emission Factor Library: sources, governance and updates

Emissions in Next-gen are calculated either with custom emission factors that customers upload or with an emission factor from the Position Green Emission Factor Library. This article covers where the factors in the Position Green Emission Factor Library come from, how we check them, and how yearly updates affect your numbers.


The library covers Scope 1, 2 and 3, and supports both activity-based and spend-based calculations. You can also add your own supplier-specific or product-specific factors.


Where the factors come from

We use recognized government, industry and life cycle assessment (LCA) sources. The lists below are examples, not the full set.

Government and national authorities

DEFRA (UK), EPA (United States), Energimyndigheten (Sweden), NVE (Norway) and CO2emissiefactoren (the Netherlands and Belgium). We mostly use these for Scope 1 and 2, and for some Scope 3 categories.

International agencies

The International Energy Agency (IEA) and the European Environment Agency (EEA).

Life cycle assessment databases

ecoinvent (licensed), the RISE climate database (needs a separate customer licence where it applies) and vegLCA (Norway). These give detailed activity-based factors for specific materials, fuels and processes.

Industry and sector sources

  • AIB: European residual mix for electricity
  • NTM: transport
  • Energiföretagen: district heating in Sweden
  • Fjernkontrollen: district heating in Norway
  • Green-e and eGRID: electricity in the United States
  • Drivkraft Sverige: fuels
  • BAFA: Germany
  • Greenview Hotel Footprinting Tool (HFT): hotel stays
  • HowGood: agriculture, food and FLAG-related factors

Calculated factors

Sometimes no source has the factor we need, or a country's rules call for its own calculation. Then we calculate the factor ourselves, from official source data and a documented method.

Two examples:

  • Average diesel and petrol blends, based on national biofuel mandates in Norway, Sweden, Denmark, Finland, the Netherlands, Belgium, France, Germany, Switzerland and the United Kingdom.
  • Mileage-based factors for electric vehicles in more than 40 countries: all of Europe, the United States, China and some others.

Calculated factors go through the same checks, documentation and version control as sourced ones. Each one traces back to its source data, assumptions and method.

Spend-based factors

For spend data, we use our own EE-MRIO model, developed at SINTEF, one of Europe's largest research institutes. It estimates the climate impact of purchases from what you spent. Read more in the EEIO methodology overview.

How we check new factors

We watch our sources for new releases all year, and update most major databases once a year. Before a new release goes into the platform:

  1. We map it to the library's structure, with unit conversions where needed.
  2. An expert reviews it to make sure we picked the right data and read it in context.
  3. A second expert checks it independently (the four-eyes principle).
  4. Where relevant, we assess how much it changes results before release.
  5. We document changes to method or structure, so every update stays traceable.

Every update is version-controlled and listed in the product release notes.

How updates affect your numbers

Next-gen keeps your data as current as possible, so your decisions rest on the best numbers available.

  • Updates apply automatically. When a new factor version is released, it applies to your inventory. You don't need to opt in.
  • Historical years are updated too. We update the factors for past years, not only the current one. This keeps your years comparable, so a change in your emissions more closely reflects real world conditions.
  • You can choose an older factor. If you need to keep a specific factor version, pick it yourself in the factor picker. See Change an emission factor.
  • Your own factors are not updated. Factors you upload under Data → Emission factors, or get from a supplier, stay as they are. Keeping them current is up to you.

Every factor change is logged, so you can see what changed and why.

Coming soon: Snapshots

Updated factors can change figures you have already reported. Snapshots will let you save your inventory exactly as you reported it, with a log of every change since. You keep current data for decisions, and your auditor still sees what you reported. We will announce the release date when it is set.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article